Blog
Wafer Cone Making Machine Working Process
Wafer Cone Making Machine Working Process:
This machine is suitable for making different shapes and sizes ice cream cones with good appearance.
This machine is suitable for making different shapes and sizes ice cream cones with good appearance.
1. Place the machine flat on the horizontal surface and not tilt.
2. Connect the power, set the upper and lower mold temperature, and then wait for the temperature to rise.
3. After the temperature rises, it will be pulled up and closed.
4. Pour into the batter, then close the top and bottom, then the cone can be formed after about one to two minutes.
5. Pull up the top and pull it off. The cone will automatically fall into the lower passage and slip out.
6. Repeat the above process and finally clean up and down the mold, keep clean, then unplug the power.
SOCIAL MEDIA